How To Replace A Single-Handle Kitchen Faucet

Most of us spend a considerable amount oftime in our kitchen.

While we don’t often think about our kitchen faucets, installinga new one can breathe new life into this commonly used room.

The most common type of kitchen faucet featuresa single handle.

Helpful add-ons include sprayers and soap dispensers.

Installing a kitchen faucet is easier thanyou think.

All you need are some basic tools, supplies, and, if possible, an extra set ofhands.

Here’s what you’ll need to get the jobdone: an adjustable wrench, flashlight, cloth, heavy-duty sponge, plumber’s putty, a bucket,and faucet kit of your choosing.

Some installations may require new supply lines, shut-off valves,or additional tools, which may be provided with your faucet kit.

When taking on this D.



task, be sure toequip yourself with the proper safety gear.

Throughout the video, we’ll alert you regardingwhen you should and should not use the safety gear.

Step 1: Remove old faucetBefore removing your old faucet, you’ll first need to turn off the hot and cold watersupply.

These are typically located under the sink.

Disconnect the supply lines withan adjustable wrench, and place a bucket under the sink to catch any excess water.

Unthreadthe faucet shank, disconnect the pullout sprayer line, and carefully pull the faucet off thesink.

Remove any old sealant with a putty knife and clean the area with a heavy-dutysponge before installing any new equipment.

Step 2: Install mounting ringFor a two-hole installation, begin by filling the putty ring with a bead of plumber’sputty along its outside edge.

Insert the putty ring into the mounting ring.

Slide them upand over the faucet’s inlet lines and onto the threaded faucet shank.

If your sink requiresfour-hole installation, you’ll need to install a deckplate before proceeding.

Deckplatesare typically provided in your faucet kit.

Step 3: Install faucet & pullout hoseWith your supply tubes facing down, and your handle located on either the right or leftside, insert the faucet through the center of the sink hole.

If your faucet featuresa pullout hose, be sure to pull the hose until it is flush with the bottom of the faucetand do not return it to its original position at this time.

From under the sink, slide thewasher and locknut over both the pullout hose and supply lines.

Thread them onto the faucetshank, making sure to align the faucet handle before tightening.

Step 4: Connect pullout hose cont.

Insert the bottom of the pullout hose through the weight attachment included in your faucetkit, then screw the manufacturer’s connection tool to the free end of the pullout hose.

Under your sink, locate the receiving tube at the base of the faucet.

Firmly push theavailable side of the connection tool up onto the receiving tube.

Step 5: Remove old soap dispenserIf your old faucet features a soap dispenser, remove it by pulling up and out.

Unscrew thedispenser’s nut and thread under the sink, releasing it from the threaded shank.

Removeall parts and clean the area thoroughly.

Step 6: Soap dispenser installationTo install a new soap dispenser, insert the threaded end of the new shank through theold dispenser’s foam gasket and sink hole.

From under the sink, tighten the nut and threadon the soap container to the threaded shank.

Pour soap through the top opening and insertthe pump into the body of the new dispenser.

Push firmly onto the pump mechanism to installthe soap dispenser head.

Step 7: Connect water supply & inlet linesSeparate the hot and cold faucet inlets at least three inches apart from each other.

If inlet line adapters were included with your faucet, thread them onto your existingwater supply lines.

Hold the nut of the supply line firmly in place with an adjustable wrench.

With another adjustable wrench, tighten the adapters for both the hot and cold water lines.

To secure them, firmly push up and insert your kit’s clips into the adapter openings.

Be careful not to cross the pullout hose connection with the inlet supply lines, as the tubeswill interfere with the hose.

Step 8: Check for leaksTurn the hot and cold water supply back on, checking for leaks above and below the sink.

Turn on the faucet, and continue checking for leaks.

Once you’re certain both thewater supply and faucet are free from leaks, replace the cap on your sink’s air gap tomatch the finish on your new faucet.

Also read: Dining Room Table Centerpieces Everyday

How To Replace A Single-Handle Kitchen Faucet



See also: Remarkable Ideas Of Nickel Faucet So as to create a home environment that expresses your unique personality and elegance, you first have to recognize what styles you admire, which of them complement each other, and avoid those who do not play nice together. In case you want to remodel your home, but are not sure how to start, you should first start a family on the style of internal design that fits you you best. At the start of any interior design job, we wonder in what style should we create our home in order to feel good in that environment. And when I say OUT OF the BOX, I dont necessarily mean go crazy, I merely suggest that you take some steps to design the sort of home that you really want or stick to the design process so that you are usually in awe of your wondrous creativity. Whether your style is modern, traditional or rustic, Shutterfly home decor lets you decorate your space with unique, customized designs. Because with any specific style, you run the danger of your property looking over themed rather than tasteful and interesting.
Minimal textures and daring geometric forms, neutral colors accented with a solitary bold colour along with polished finishes and irregular in shape balance are key discovering features of modern style interiors. A word that's commonly used to describe modern style is sleek, and there is not a lot of clutter or accessories involved with a modern day style. The style is contemporary modern style but maintains a phone line through picked finishes and color range used. You must remember that designers blend different elements from many decorating styles together, but the essential thing is to identify the core aspects of each one. Soft modern day interiors are characterized by neutral elements accentuated by bold color, or glamorous elements, such as beading and glass, but the focus is always the fundamentals of line, form and form. Take elements of your preferred style and develop your design so that you avoid over doing it. When it comes to modern-day style, essential things are smooth, spending geometric shapes and curvy lines. Line can be taken through the use of bold colour blocks, high ceilings, square edged furniture, linear wooden floors, floor mats, bare windows and geometric shapes in wall structure art and sculpture.